You're still too green to go into battle. There's no point in sending you in if you're just going to end up coming back as another casualty. So, what are you waiting for? Start reading our Battlefield 2 guide. Here's a taste of what you're in for:

• Basics: Welcome to Basic Training, recruit. Here you'll learn everything you need to start playing along with some helpful tips.
• Instruction Kit: All of the class kits described with expert tactics.
• Vehicles: How to make the most out of the numerous vehicles.
• Leading the Way: Strong leadership makes for a strong attack force. We tell you how to direct your troops effectively and stop the enemy leader from doing their job.
• Map Recon: Details on each map and winning strategies.
• Secrets: How to unlock extra weapons and win well deserved awards.

• mapList.list: Every map on the server has an ID number, which is used for voting to change maps. This command lists those numbers, the map name, game mode and the number of players if specified.

• mapList.configFile: Used to specify the location of the _mapList.con The default is My DocumentsBattlefield 2 DemoServerConfigs

• mapList.load: Makes the server reload the _mapList.con

• mapList.save: Saves the current map list on the server to the file _mapList.con

• mapList.mapCount: Shows the total number of maps in the current map list

• mapList.currentMap: Shows the map list ID number of the current map being played

• mapList.clear: Clears the current map list. Warning: If there are no maps in the map list when the server starts loading a new map, all clients will be left on the loading screen.

• mapList.remove:
• mapList.append:
• mapList.insert:

• admin.listPlayers: Lists the players connected to the server. This command lists the players ID number, their player name and if the player is remote it also lists the players IP number. The players ID number is also available on the Scoreboard / Manage Tab
• admin.runNextLevel: Forces the server to end the round and start the next map in the map list.
• admin.currentLevel: Shows the map list ID number for the current map being played. The same as mapList.currentMap.
• admin.nextLevel: Shows the map list ID number for the next map to be played.
• admin.restartMap: Restarts the current map.
• admin.banPlayer: [timeout] Enter the player ID number you would like to ban. Bans the player from this server by using their IP address.

  - Bans can be set on CD key hashes.
  - Bans are stored as absolute times in banlist.con. Existing bans in banlist.con will be interpreted as permanent bans.

  You can choose from a selection of time outs:
  - Entering 'perm' means that the ban is permanent. This is the default if no time out is entered.
  - An integral number meaning the number of seconds the ban will be active (i.e. 3600 means one hour).
  - Entering 'round' means the ban is active until the next map.
  - A whole number preceded by a colon (i.e. :1234567), meaning the epoch expiration time of the ban (number of seconds since 1 Jan 1970).

• admin.banPlayerKey: [timeout] Enter the player ID number you would like to ban. Bans the player from this server by using their CD key hash. You can also specify a time out. See admin.banPlayer for the time out list.
• admin.addAddressToBanList: [timeout] Enter the IP number you would like to ban. You can also specify a time out. See admin.banPlayer for the time out list.
• admin.addKeyToBanList: [timeout] Enter the CD key hash you would like to ban. You can also specify a time out. See admin.banPlayer for the time out list.
• admin.removeAddressFromBanList: Enter the IP address you would like to remove from the ban list.
• admin.removeKeyFromBanList: Enter the CD key hash you would like to remove from the ban list.
• admin.clearBanList: Clears all ban lists.
• admin.listBannedAddresses: Displays a list of the currently banned IP addresses.
• admin.listBannedKeys: Displays a list of the currently banned CD keys.
• admin.kickPlayer: Enter the ID number of the player you would like to kick.

- On the server create a new plain text document in admin called default.cfg
- Enter the following text into the new file:

port=4711
password=YourPassword

- Save the file, and start the server.

Now you can access the server remotely by using the following commands
from a client:

- rcon login
Use this command to login to the server.

- rcon users
This command lists all the users connected to the server. Very similar to admin.listPlayers

- rcon exec
Replace with a console command you would like to execute on the server.
For example: rcon exec admin.kickPlayer 3